Communication
EP6090-0000
 
EP6090-0000 | Display box with navigation switch and operating hours counter
EP6090-0000
Connector
assignment
I/O
connection
Display
Navigation switch
Power supply
status display:
Box supply (US)
Auxiliary voltage (UP)
Power supply feed
Power supply down- 
stream connection
1 | Tx+
2 | Rx+
3 | Rx-
4 | Tx-
1 | + 24 V DC Us
2 | + 24 V DC UP
3 | GNDs
4 | GNDP
EtherCAT
signal input 
EtherCAT
signal output 
extended temperature range
extended shock and vibration range

EP6090-0000 | Display box with navigation switch and operating hours counter

The EP6090-0000 display box has an illuminated, low-reflection LC display with two lines of 16 characters. It can be used, for example, for displaying status messages or diagnostic information. A non-resettable operating hours counter is integrated and can be displayed and also read out via the controller.

Via the user program dynamic and static application-specific texts can be displayed, e.g. “Production counter: (count value)”. If the output text is longer than 16 characters, the box automatically switches to scrolling text mode. Two special characters can be defined via a 5 x 8 pixel matrix.

The statuses of the navigation switch – up, down, left, right and OK – are transmitted to the controller as binary variables and can be used, for example, to control the display.

Technical data EP6090-0000
Technology EtherCAT display box
Switch inputs navigation switch: up, down, left, right, OK
Display LC display, 2 x 16 characters (> 16 characters = scrolling text mode), switchable backlight
Special characters 2 characters (5 x 8 pixel matrix)
Operating hours counter 32 bit overflow after 136 years (no reset possible), secure data storage > 100 years (@15 minutes writing interval), accuracy: ±50 ppm
Time measuring 4 x 32 bit second counter (reset possible)
Counter 4 x 32 bit counter (reset possible)
Storage interval manually/automatically every 15 minutes
Distributed clocks
Current consumption from US typ. 130 mA + sensor supply
Power supply connection feed: 1 x M8 male socket, 4-pin; downstream connection: 1 x M8 female socket, 4-pin
Weight approx. 230 g
Operating/storage temperature -25…+60 °C/-40…+85 °C
Vibration/shock resistance conforms to EN 60068-2-6/EN 60068-2-27
EMC immunity/emission conforms to EN 61000-6-2/EN 61000-6-4
Protect. class/installation pos. IP 65/66/67 (conforms to EN 60529)/variable
Approvals/markings CE, UL in preparation
Accessories  
ZK1090-3xxx-xxxx Cables for EtherCAT signal in- and -output
ZK2020-3xxx-xxxx Cables for M8 power supply
Product announcement
estimated market release 3rd quarter 2020